Capacity Range: 15-60t 

​

• Basic component element that is convenient for packing and delivery. 

• The reserved holes for different component installation enables different types of device to be assembled such as mono-rail, double rail and low headroom type, etc.

Capacity Range: 1-32t

​

• Suitable for heavy duty load. 

• Combination of fixed mounted type and double-rail trolley operated on double girder. 

• The wheel that is made of mono-block medium carbon steel and the surface is processed with hardness heat treatment. 

• Wheel protection cover and buffer rubber pad can be installed on demand to reduce impact. 

• Automated adjustment by eccentric shaft, capable of running on uneven rails and evenly sustain the load. 

• Hollow shaft gearbox can be installed on demand to increase the life span of gears.

Combination of two hoists. 

​

• Heavy and light duty hoist mounted on the same double-rail trolley. 

• Main hoist handles heavy duty; it has slow lift speed and consumes high electricity. Sub-hoist handles light duty it has relatively high lift speed, better power saving and easier to operate with. 

• Benefits of two different hoists combining into one, saves the need to have another set of rails and it ensures no interference between the two hoists. 

• There is a wide range of combination to choose from, for detail information please contact us.

Capacity Range: 1t-10t

​

• Suitable when there is limited space for the trolley or curved moving condition. Combination of fixed mounted-type and mono-rail element operate on the bottom of the single girder. 

• The wheel is made of mono-block medium carbon steel and the surface is processed with hardening heat treatment. 

• Wheel protection cover maybe installed on demand to extend life of gears; anti-drop steel plate and buffer rubber pad are installed for the purpose to achieve safety and reliability. 

• Wheels can be adjusted to beam width therefore it is easy to adjust and implement. 

• Two parallel drive wheels make traveling more stable and smooth. 

• It can be applied to a curved beam with bending radius of 1.5 to 3 meters therefore if curved working space existed it can also be used.

Capacity Range: 1t-10t 

​

• This applies to the factory that has lower ceiling which requires the maximum hook path. 

• The compact design of low headroom trolley hoists enables maximum height of lift and full utilization of the available space. 

• Detail specification is available on request.

Capacity Range: 20t-60t

​

• Two ropes come from the drum make the center of loading invariable while loading.

• The design of double reeling is safer for heavy loading and can ensure the centre of gravity is kept in a vertical straight line at all times.